Chào mừng bạn đã đến với Cộng đồng LuyenDich.com

550 questions

1,345 answers

276 comments

3,046 users



NHẬN BÀI QUA EMAIL

Nhập địa chỉ Email:


Sau khi đăng ký, hãy mở Email để kích hoạt





hepl me !! dich sang tieng viet

0 votes

Assembly and Replacement of the Tunable Diaphragm.

P1:

Using your fingertip, apply a small amount of talcum powder to the inside surface of the flexible edge of the diaphragm. This will facilitate assembly and maintain smooth and quiet low/ high frequency afternoon. Snap the diaphragm with your fingers to remove excess talc.

P2:

Insert the flexible edge of the diaphragm into the groove of the rim. This is the best accomplished by starting with the rim positioned above the legible side of the diaphragm.

P3:

Visually examine the ring to ensure that the flexible edge is smoothly engaged inside the rim. If necessary, flex the assembly by pinching the outer rim edge between the thumb and fingers. Repeat this flexing procedure after rotating the assembly one quarter.

P4:

To attach the rim/ diaphragms assembly to the chestpiece, engage the groove of the rim (with the diaphragm attached) around the chestpiece at one point and hold it in place with your thumb.

P5:

Slowly roll the rim around and over the chestpiece edge using both thumb, moving in opposite directions around the chestpiece.

P6:

 Visually inspect the edge where the diaphragm engages the rim for uniform containment. Minor adjustments may be made by slightly pulling and rolling the rim away from the diaphragm, allowing the diaphragm to slip into position.

Assembly and Replacement of the Tunable Diaphragm.

P1:

Using your fingertip, apply a small amount of talcum powder to the inside surface of the flexible edge of the diaphragm. This will facilitate assembly and maintain smooth and quiet low/ high frequency afternoon. Snap the diaphragm with your fingers to remove excess talc.

P2:

Insert the flexible edge of the diaphragm into the groove of the rim. This is the best accomplished by starting with the rim positioned above the legible side of the diaphragm.

P3:

Visually examine the ring to ensure that the flexible edge is smoothly engaged inside the rim. If necessary, flex the assembly by pinching the outer rim edge between the thumb and fingers. Repeat this flexing procedure after rotating the assembly one quarter.

P4:

To attach the rim/ diaphragms assembly to the chestpiece, engage the groove of the rim (with the diaphragm attached) around the chestpiece at one point and hold it in place with your thumb.

P5:

Slowly roll the rim around and over the chestpiece edge using both thumb, moving in opposite directions around the chestpiece.

P6:

 Visually inspect the edge where the diaphragm engages the rim for uniform containment. Minor adjustments may be made by slightly pulling and rolling the rim away from the diaphragm, allowing the diaphragm to slip into position.

Assembly and Replacement of the Tunable Diaphragm.

P1:

Using your fingertip, apply a small amount of talcum powder to the inside surface of the flexible edge of the diaphragm. This will facilitate assembly and maintain smooth and quiet low/ high frequency afternoon. Snap the diaphragm with your fingers to remove excess talc.

P2:

Insert the flexible edge of the diaphragm into the groove of the rim. This is the best accomplished by starting with the rim positioned above the legible side of the diaphragm.

P3:

Visually examine the ring to ensure that the flexible edge is smoothly engaged inside the rim. If necessary, flex the assembly by pinching the outer rim edge between the thumb and fingers. Repeat this flexing procedure after rotating the assembly one quarter.

P4:

To attach the rim/ diaphragms assembly to the chestpiece, engage the groove of the rim (with the diaphragm attached) around the chestpiece at one point and hold it in place with your thumb.

P5:

Slowly roll the rim around and over the chestpiece edge using both thumb, moving in opposite directions around the chestpiece.

P6:

 Visually inspect the edge where the diaphragm engages the rim for uniform containment. Minor adjustments may be made by slightly pulling and rolling the rim away from the diaphragm, allowing the diaphragm to slip into position.

asked Jun 10, 2013 in Dịch Anh-Việt by ben (120 points)
Nếu thấy hay thì vui lòng click Like nhé:   

Please log in or register to answer this question.

Related questions

0 votes
2 answers 377 views
+1 vote
2 answers 1,054 views
0 votes
0 answers 818 views
0 votes
2 answers 732 views
732 views asked Apr 22, 2012 in Dịch Anh-Việt by kayleepham (190 points)
Luyện dịch | Dịch Anh Việt| Dịch Việt Anh | Bí quyết dịch | Tài liệu dịch| Học Dịch | | Tài liệu dịch| Hoc Tieng Anh |Hoc Tieng Anh truc tuyen |
...